fix · Nexgrill
Nexgrill 720-0896 igniter 720-0896 spark ignition uses multiple ceramics into a collector box. Match electrode bend and lead length to the 720-0896 schematic — not a Weber AA kit.
moderate PT1H \"720-0896\" \"720-0896E\" Updated 2026-09-04
On this page Procedure FAQ Shop
Verified replacements — we don’t stock these
Confirm fit against your data plate and the retailer’s diagram before you buy.
We may earn a commission. No fake prices or inventory.
If none of those match the part in your hand, search instead:
Amazon search · BBQGuys
Igniter electrode gap at a burner port Ceramic insulator, metal tip aimed at a burner port. Spark gap about the thickness of a nickel. SIDE VIEW · ELECTRODE GAP burner tube ports ceramic lead tip spark gap ≈ nickel ~1.8–2.1 mm to a port Tip aims at a port, not the tube wall. Cracked ceramic = replace. Fig. — Electrode: ceramic, tip, burner port, ~nickel gap. Two AA cells in the side-table battery well Underside of the left side table. Two AA batteries, polarity stamped in the well. UNDERSIDE · LEFT SIDE TABLE side table (from below) BATTERY WELL AA − + + AA − Two AA cells. Polarity is stamped in the plastic. Reverse = no click. Corroded springs: dry brush, not oil. Then new alkalines. Fig. — Battery well under the side table. Two AAs. Match stamped polarity. Large Nexgrill carts spark from hose-clamp or bracket ceramics into a battery collector. One dead ceramic does not mean replace every tube. Search Nexgrill 720-0896 igniter electrode and match the photo.
Related: Nexgrill igniter , 720-0830H . Hub: Nexgrill .
Procedure
Confirm 720-0896 on the plate.
Lid open. Tick? Battery / box first if silent.
Tick, no snap at one burner: that ceramic.
All snap, no fire: regulator .
Tank off. Photograph ceramics and boots.
Replace one electrode. Gap to the tube.
Vacuum porcelain chips.
Test lid open.
FAQ
Pinned ASIN?
Search-only. No live pin for 720-0896 electrodes in our verified list.
Not affiliated with Nexgrill.