fix
Gas grill will not stay lit Lights then dies: excess-flow lock, wind, thermocouple on some side burners, or a tube that will not stay on its orifice. Diagnose before replacing the manifold.
easy PT35M Updated 2026-09-04
On this page Procedure FAQ Shop
Verified replacements — we don’t stock these
Confirm fit against your data plate and the retailer’s diagram before you buy.
We may earn a commission. No fake prices or inventory.
If none of those match the part in your hand, search instead:
Amazon search · BBQGuys
LP tank, regulator, and hose Propane tank, QCC1 handwheel, regulator body with excess-flow device, hose to the manifold. LP TRAIN · TANK → VALVES 1 LP tank 2 QCC1 handwheel 3 regulator excess-flow inside 4 hose 5 manifold / valves Open the tank slowly, knobs off. Fast-open trips the excess-flow → tiny flames. Fig. — LP tank, QCC1 coupling, regulator, hose to the valves. Match symptoms: clicks but never lights → ignition repair vs replace . Lights, runs one minute, all burners die → tank/regulator. One burner dies → tube/venturi.
Procedure
Lid open. Wind screen if gusty.
Fresh tank. Slow valve open. Regulator reset .
Light with a stick if the igniter is weak — separate spark from gas.
If it dies only on HIGH with a new tank: excess flow from opening too fast — reset again slower.
Side burner with thermocouple: tip must sit in the flame; bent tip drops out.
Main tube slips off orifice when hot: clamp/bracket failure — reseat and replace hardware.
Soap test hose after any regulator work.
Still dying: spider or ports .
FAQ
Is the grill unsafe?
If you smell gas with knobs off, shut the tank and do not keep lighting. Fix leaks first.