Fix My Grill Parts finder · repair notes

fix · Napoleon

Napoleon Prestige 500 igniter

Prestige 500 spark / LED ignition is not Rogue-base N357-0021LY by default. Match the Prestige 500 schematic for module and electrode SKUs.

moderate PT1H15M Prestige 500Prestige 500 RSIB Updated 2026-09-04

Igniter electrode gap at a burner port Ceramic insulator, metal tip aimed at a burner port. Spark gap about the thickness of a nickel. SIDE VIEW · ELECTRODE GAP burner tube ports ceramic lead tip spark gap ≈ nickel ~1.8–2.1 mm to a port Tip aims at a port, not the tube wall. Cracked ceramic = replace.
Fig. — Electrode: ceramic, tip, burner port, ~nickel gap.
Two AA cells in the side-table battery well Underside of the left side table. Two AA batteries, polarity stamped in the well. UNDERSIDE · LEFT SIDE TABLE side table (from below) BATTERY WELL AA − + + AA − Two AA cells. Polarity is stamped in the plastic. Reverse = no click. Corroded springs: dry brush, not oil. Then new alkalines.
Fig. — Battery well under the side table. Two AAs. Match stamped polarity.

Prestige 500 is a step up from Rogue: more burners, often IR options, and different panel electronics (some years use LED buttons such as N660-0013-class on Prestige panels). Do not order Rogue parts from a Rogue guide unless the Prestige exploded view shows the same number.

Related: Rogue 425 igniter, Prestige sear plates.

Procedure

  1. Plate: Prestige 500 + RSIB/SIB suffix.
  2. Tick / LED behavior with lid open.
  3. Isolate module vs one ceramic.
  4. Gas path if all snap dark: regulator.
  5. Photograph ceramics and module plugs.
  6. Replace to the Prestige schematic only.
  7. Test lid open.
  8. Search-only ASINs.

FAQ

Rogue electrode OK?

Only if the Prestige parts list shows the same N240-xxxx. Usually order Prestige-specific.

Not affiliated with Napoleon.

Related notes

Replace Char-Broil burner tubes

Pull stamped Char-Broil tubes, match length and inlet, reseat on the orifices, and leak-check. Universal tubes that are short are how flashbacks start.

Replace Char-Broil heat plates

Measure tent length and width on Performance and Commercial carts. Heat plates are the drip shields — when they lace, burners die. Do not buy by lid name alone.

Char-Broil igniter replacement

Box-store Char-Broil Performance and Commercial carts: piezo versus AA collector, electrode clips on stamped burners, and why the side burner is a separate lead.

How to find your grill model and serial number

Where rating plates live on Weber, Char-Broil, Nexgrill, and Traeger, what to photograph, and how to use the number in the parts finder without guessing from the lid badge.