fix · Weber
Weber Genesis II E-330 warming rack Genesis II E-330 warming rack is a 300-series hinged or stationary rack sized to the 26–27-inch box — confirm II vs original Genesis before ordering.
easy PT25M Genesis II E-330 Genesis II S-330 Updated 2026-09-14
On this page Procedure FAQ Shop
Verified replacements — we don’t stock these
Confirm fit against your data plate and the retailer’s diagram before you buy.
We may earn a commission. No fake prices or inventory.
If none of those match the part in your hand, search instead:
Amazon search · BBQGuys
Top-down gas firebox layers Cooking grates on top, inverted-V flavorizer bars over the burner tubes, electrode at the left tube. TOP DOWN · GAS FIREBOX 1 cooking grates 2 flavorizer bars 3 burner tubes + ports 4 electrode (left tube) LAYERS (top → bottom) 1 Grates — food sits here 2 Flavorizer / heat tents 3 Burner tubes + ports 4 Electrode at left port Lift grates, then tents, to reach tubes. Gas off. Fig. — Firebox, top down: grates, flavorizer bars, burner tubes, electrode. The E-330 warming rack sits above the main grates in the Genesis II 300 box. OEM numbers vary by year (hinged vs stationary). Measure width and depth; do not assume an original Genesis or Spirit rack will land on the II mounts.
Related: cooking grates , Flavorizers . Hub: Genesis .
Procedure
Plate: Genesis II E-330 / S-330.
Cold. Lift the rack. Note hinge pins vs drop-in tabs.
Measure width and depth. Photograph the mount points.
Search Genesis II E-330 warming rack / the OEM number from your schematic.
Dry-fit. Pins must engage without bending the lid thermometer.
Grates and bars must clear the rack when the lid closes.
Rust flakes into food: replace — do not keep a lace rack.
Wrong family: read Weber data plate .
FAQ
Search-only?
Yes. Warming-rack OEM SKUs shift by year; we pin only after a live amazon.com/dp match for that exact kit.
Not affiliated with Weber.