Fix My Grill Parts finder · repair notes

fix · Napoleon

Napoleon Rogue 425 burner tubes

Rogue 425 mains are OEM N100-0060 18-gauge stainless tubes (three). Do not install single-pipe Nexgrill 1-inch kits.

moderate PT2H Rogue 425Rogue SE 425 Updated 2026-09-04

Clean versus clogged burner ports Left tube shows even open ports and a blue flame sketch. Right tube shows grease-clogged ports and a yellow uneven flame. BURNER TUBE · PORTS CLEAN Even blue cones. Every port open. CLOGGED Grease in the holes. Yellow, lift, dead spots. Ream with a bit smaller than the port. Do not drill oversized. Brass brush the row. Keep liquid out of the venturi / inlet. If the tube wall is lace under the ports, replace the set — do not patch holes.
Fig. — Burner tube: clean ports (left) versus clogged ports (right).
Top-down gas firebox layers Cooking grates on top, inverted-V flavorizer bars over the burner tubes, electrode at the left tube. TOP DOWN · GAS FIREBOX 1 cooking grates 2 flavorizer bars 3 burner tubes + ports 4 electrode (left tube) LAYERS (top → bottom) 1 Grates — food sits here 2 Flavorizer / heat tents 3 Burner tubes + ports 4 Electrode at left port Lift grates, then tents, to reach tubes. Gas off.
Fig. — Firebox, top down: grates, flavorizer bars, burner tubes, electrode.

Napoleon lists N100-0060 as the main tube burner for Rogue / RXT / RSE-1 families on warranty parts portals. Three mains under five sear plates. IR rear/side burners on RSIB are separate SKUs.

Related: sear plates, igniter.

Procedure

  1. Photograph Rogue 425 variant and three mains.
  2. Tank off. Grates and five sear plates out.
  3. Release tubes. Note shutter position (LP vs NG).
  4. Sky-check. Replace perforated tubes.
  5. Dry-fit N100-0060-class tubes. Orifices swallowed.
  6. Electrode gap at factory tabs.
  7. Sear plates on. Soap. Lid open. Light each main.
  8. Yellow: ports / shutter.

FAQ

Search-only?

Yes — no live ASIN pinned for N100-0060 in our verified file.

Not affiliated with Napoleon.